FoxGate S6124, Руководство по управлению

Страница: 383 / 391

383
43.7 debug driver
Command: debug driver {receive | send} [interface { <interface-name> | all}]
[protocol { <protocol-type> | discard | all}] [detail]
no debug driver {receive | send}
Function: Turn on the on-off of showing the information of the CPU receiving or sending
packets, the ―
no debug driver {receive | send}
‖ command turn off the on-off.
Parameter: receive | send show the information of receiving or sending packets;
interface { <interface-list> | all}: interface-list is the Ethernet port number, all indicate all
the Ethernet ports.
protocol { <protocol-type> | discard | all}: protocol-type is the type of the protocol of the
packet, including snmp
、
telnet
、
http
、
dhcp
、
igmp
、
arp
、
ssh
、
icmpv6
、
dot1x
、
gvrp
、
stp
、
lacp
、
cluster
、
eapou, all means all of the protocol types, discard means all the
discarded packets.
Detail show detail information.
Command Mode: Admin Mode
Usage Guide: This command is used to debug, it is supposed to be used with the help of
the technical support.
Example: Turn on the on-off for showing the receiving packets.
Switch#debug driver receive
Chapter 44 Commands for PoE
44.1 Commands for PoE Configuration
44.1.1 power inline enable (Global)
Command: power inline enable
no power inline enable
Function: Enable /disable global PoE.
Parameters: None.
Command Mode: Global Mode.
Default: Global PoE is enabled.
Usage Guide: With PoE globally disabled, there would be no power output no matter