Fore Systems ES-2810, Руководство пользователя

Страница: 47 / 60

ES-2810 ATM Uplink Module User Guide 4 - 7
Configuring the Module
When two ATM Modules are installed in a stack, both modules will join the same
set of ELANs and provide load sharing and failover for each ELAN that they join.
Each ATM Module will provide connectivity to a subsection of the total number of
ATM clients on a given ELAN. Determining which module serves which clients is
based on the even/odd designation of the traffic’s destination MAC addresses.
NOTE
default
and
system
ELAN/VLAN names
are not permitted. These names are reserved
by the network management systems, where
default
ELAN maps to
system
VLAN.
NOTE
When an ATM Module is installed in an
ES-2810, any VLANs which could potentially
overlap with other VLANs cannot be
mapped to ATM ELANs. FORE Stack View
will not allow multiple potentially
overlapping VLANs to be mapped to ATM
ELANs.
NOTE
Make sure that LANE services for a given
ELAN already exist before mapping a VLAN
to an ATM ELAN.
To map existing VLANs using FSV, complete the following steps:
1. From the main menu, select Configuration>VLAN Setup. The VLAN
Setup dialog box displays: