Fore Systems ES-2810, Руководство пользователя

Страница: 40 / 60

3 - 18 ES-2810 ATM Uplink Module User Guide
Upgrading Software and Firmware
3.3.2 Upgrading ATM Module Firmware Via Local Management
During normal operation, the Console port will give access to a menu, identical to
the one accessible via a telnet connection to the switch. To upgrade the ATM Mod-
ule firmware from the console, complete the following:
NOTE
A local, Ethernet-attached TFTP server
should be used.
NOTE
Make sure to back up your switch
configuration (via TFTP client or FORE Stack
View) before upgrading. When using FORE
Stack View to backup the current switch
configuration (Configuration>Backup to
disk), use the default path.
NOTE
When saving or restoring a switch/stack
configuration file, make sure that the server
is attached to the management VLAN/
ELAN. In instances where the management
VLAN/ELAN is not the switch default, you
may have to create the management VLAN/
ELAN manually through FSV, then restore
the configuration.
1. With a VT100- compatible terminal attached to the switch’s Console
port, press Enter to display the Local Management login screen.
2. From the main menu, select
Administrator
and press Enter. Select-
ing this will give you access to the configuration options.
3. When prompted for a password, press Enter. The Local Management
main menu screen displays.
4. Select
Software Update
and press Enter.
5. Select
Load Software
and press Enter.
6. If an ATM Module is detected, you are prompted to select a device to
update:
switch
or
ATM
. The default is
switch
. Verify that
ATM
is
selected and press Enter to upgrade the ATM Module firmware.
7. Launch your TFTP server. If this is a first time upgrade, specify the IP
address of the TFTP server and the filename of the software to be
loaded.
When prompted to load software and reset, enter Yes. The upgrade
process takes a few minutes.
8. If there are two modules in the stack, repeat steps 2 through 7 for the
remaining module.