Fore Systems ES-2810, Руководство пользователя

Страница: 33 / 60

ES-2810 ATM Uplink Module User Guide 3 - 11
Upgrading Software and Firmware
3.3 Upgrading the ATM Module Firmware
You can use one of the following methods to upgrade ATM Module firmware:
• FORE Stack View (FSV)
• Local management via the Console port of the switch that contains
the ATM Module
NOTE
ATM Module firmware cannot be upgraded
from maintenance mode.
NOTE
When loading ATM Module firmware for the
first time (or upgrading switch firmware to
2.5 for the first time), you should use the
initial upgrade procedures outlined in the
ES-2810 ATM Uplink Module Release Notes.
3.3.1 Upgrading ATM Module Firmware Via FORE Stack View
FORE Stack View (FSV) includes an easy-to-use Firmware Upgrade Wizard. The
uplink configuration remains intact when this upgrade procedure is used. To use
FSV to upgrade the ATM Module firmware, you will need a Windows NT/95/98
client running FSV. When FSV contacts the switch or stack, the front (interface
side) of the switch or stack is displayed. The switch or stack can be managed from
this display.
To upgrade the ATM Module firmware using FSV, complete the following steps:
NOTE
It is recommended to upgrade switch and
ATM Module firmware independently,
upgrading switch firmware first. Although
the same upgrade wizard is used to upgrade
both switch firmware and ATM Module
firmware, this section covers procedures for
upgrading the ATM Module firmware only.
For procedures on upgrading switch
firmware, see Section 3.2.
1. From the main menu, select Device>Firmware or right click the switch
and select from the pop-up menu. The FORE Stack View Upgrade Wiz-
ard displays.