Fore Systems ES-2810, Руководство пользователя

Страница: 32 / 60

3 - 10 ES-2810 ATM Uplink Module User Guide
Upgrading Software and Firmware
NOTE
When saving or restoring a switch/stack
configuration file, make sure that the server
is attached to the management VLAN/
ELAN. In instances where the management
VLAN/ELAN is not the switch default, you
may have to create the management VLAN/
ELAN manually through FSV, then restore
the configuration.
NOTE
The ES-2810 is not operational while in
maintenance mode.
NOTE
The TFTP server cannot be ATM-attached
when trying to download code in
maintenance mode. Upgrading firmware via
the console requires a TFTP server operating
on an Ethernet segment, attached to the
switch.
NOTE
For stack configurations, you must upgrade
the switch containing the Matrix Module
first.
1. Press the RESET button on the switch for about 5 seconds until the sys-
tem LED flashes green quickly.
2. Attach a terminal to the serial port on the front panel.
3. Press Enter a couple of times to receive a command prompt.
4. Type
help
to list all commands available while in maintenance mode.
5. Enter the following at the command prompt and then press Enter:
tftp<
filemame
><
IP address of the switch
><
IP address of
the TFTP server
>
The TFTP server utility starts the upgrade process.