Fore Systems ES-2810, Руководство пользователя

Страница: 15 / 60

ES-2810 ATM Uplink Module User Guide 2 - 1
CHAPTER 2
Installation
This chapter describes the installation and cabling procedures for the ATM Mod-
ule. The chapter is organized into the following sections:
• Section 2.1 - Unpacking and Checking Equipment
• Section 2.2 - ESD Precautions
• Section 2.3 - Installing the ATM Module
• Section 2.4 - Removing an ATM Module
• Section 2.5 - Cabling
• Section 2.6 - Verifying ATM Module Operation
2.1 Unpacking and Checking Equipment
Upon receipt of, and before unpacking your ATM Module, inspect the package for
any damage that may have occurred during shipping. If the package shows any
signs of external damage or rough handling, notify your carrier’s representative.
When unpacking your ATM Module, be sure to keep all original packing materi-
als. They may be needed for storing, transporting, or returning the product.
NOTE
All products returned to FORE Systems,
under warranty, must be packed in their
original packing materials.
2.1.1 Checking the Package Contents
A complete inventory of your package should be performed before proceeding.
Check the contents of the ATM Module package against the packing slip and verify
that all listed items have been received.
If any of the items are missing or damaged, please contact FORE Systems’
Technical Assistance Center immediately, using one of the methods described in
the Preface of this manual.
CAUTION Static electricity can cause severe damage to
the sensitive electronic components on the
ATM Module. To avoid damage due to
electrostatic discharge, leave the ATM
Module in its electrostatic bag until you are
ready to install it.