Fore Systems ES-2810, Руководство пользователя

Страница: 23 / 60

ES-2810 ATM Uplink Module User Guide 3 - 1
CHAPTER 3
Upgrading Software and
Firmware
The following software is required to support the ATM Module in an ES-2810
Ethernet Switch:
• FORE Stack View (FSV) 2.0.5 or greater (see Section 3.1)
• Switch firmware version 2.5 or greater (see Section 3.2)
• ATM Module firmware version 5.2 or greater (see Section 3.3)
The upgrade files can be obtained from the CD that was shipped with your module
or from FORE Systems’ Technical Assistance Center (TAC) via the web. See the
Preface of this manual for information on how to access TACtics Online.
NOTE
It is highly recommended that all firmware
upgrades be completed via Ethernet-attached
TFTP or Bootp servers.
NOTE
When loading ATM Module firmware for the
first time (or upgrading switch firmware to
2.5 for the first time), you should use the
initial upgrade procedures outlined in the
ES-2810 ATM Uplink Module Release Notes.
NOTE
Make sure you have backed up your switch
configuration (via TFTP client or FSV) before
proceeding with the upgrade process. When
using FSV to backup the current
configuration of the switch
(Configuration>Backup to disk), use the
default path.
NOTE
When saving or restoring a switch/stack
configuration file, make sure that the server
is attached to the management VLAN/
ELAN. In instances where the management
VLAN/ELAN is not the switch default, you
may have to create the management VLAN/
ELAN manually through FSV, then restore
the configuration.