Force FORCEOL115-E, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 68

2 106346-06 - 8/19
FORCE Installation, Operating & Service Manual
IMPORTANT INFORMATION - READ CAREFULLY
The following terms are used throughout this manual to bring attention to the presence
of hazards of various risk levels, or to important information concerning product life .
All boilers must be installed in accordance with National, State and Local Plumbing,
Heating and Electrical Codes and the regulations of the serving utilities . These
Codes and Regulations may differ from this instruction manual . Authorities having
jurisdiction should be consulted before installations are made .
In all cases, reference should be made to the following Standards:
USA BOILERS
A . Current Edition of American National Standard ANSI/NFPA 31, “Installation of Oil
Burning Equipment”, for recommended installation practices .
B . Current Edition of American National Standard ANSI/NFPA 211, “Chimneys, Fire
places, Vents, and Solid Fuel Burning Appliances”, For Venting requirements .
C . Current Edition of American Society of Mechanical Engineers ASME CSD-1,
“Controls and Safety Devices for Automatically Fired Boilers”, for assembly and
operations of controls and safety devices .
D . All wiring on boilers installed in the USA shall be made in accordance with the
National Electrical Code and/or Local Regulations .
NOTICE: Indicates special instructions on
installation, operation, or service which are
important but not related to personal injury
hazards.
CAUTION
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate
injury.
WARNING
Indicates a hazardous situation
that, if not
avoided, could result in death or serious injury.
!
!
DANGER
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
!
NOTICE:
This boiler has a limited warranty. The warranty for this boiler is valid only if the boiler has been
installed, maintained and operated in accordance with these instructions.
Surface rust on cast iron sections may be attributed to the manufacturing process as well as condensation
during storage. Surface rust is normal and does not affect the performance or longevity of a boiler.