18
5.5
Info bar
When you change channel, you will see an information bar for the new programme, showing the name of the chosen
channel, the title of the current programme, the time the programme started and a bar showing how much of the
programme has been transmitted as a proportion of the total duration. It also shows the title of the next programme
with the time it starts. Some of this information may not be available for the chosen channel.
The info bar can also be accessed by pressing INFO on the remote
control at any time.
If INFO is pressed twice, you will see the extended Programme
Description.
Figure 22
(Info bar)
5.6
Switching between TV and Radio
By pressing RADIO on the remote control, you can switch between TV and Radio channels. Radio channels have their
own channel list which can be accessed and organised in the same way as the TV channel list.
5.7
Sound control
You can adjust the audio volume on the Force receiver with the left and right arrows on the remote control. The Sound
On/Off button on the top left of the remote control can be used for switching the audio on/off.
Since these controls are also available directly on your TV set, they can conflict. It is suggested that you only use one of
these controls.
The volume on the VCR SCART and the digital audio outputs are not affected by adjustment on the Force receiver. You
can decide whether the volume on the Analogue Audio outputs is or is not controlled from the receiver. From Main
Menu, select SYSTEM, then TV FORMAT. Set the Phono option to be either
•
DIRECT – where the volume is always at maximum and can be controlled on your Hi-Fi equipment
•
FOLLOW TV – where the volume is set by the control for the receiver.
5.8
Language Control
Some programmes are transmitted with a choice of languages on the audio channel and subtitle text. In this case, the
language matches your selection for the on-screen menus, but you can choose any other available language by pressing
the LANG button on the remote control.
You will see a menu which also allows you to turn on or off the left and right audio channels. A cross present in the box
indicates that the audio channel is enabled.
When you have made your new selection, highlight SUBMIT and press OK on the remote control.
5.9
Teletext
If a channel carries teletext, it can be viewed by pressing the TEXT button on the remote control or from the main menu
by selecting TELETEXT. Select a desired page by entering the number. The coloured buttons on the remote control give
direct access to pages 100, 200, 300 and 400 respectively.
Note that teletext is not provided on terrestrial channels in some countries.
English
