FOR-A USF-212PS, Руководство по эксплуатации, Страница: 31 / 40

31

Trap Settings
Click .
This window allows you to set various trap transmission from USF-212S to SNMP Manager.
Clicking Refresh updates window to the latest.

Unit Trap Settings
Item Default Settings Description
Authentication
failure Trap
Enable
Disable
Enable
Enable: If the community names set on
Read Only1, 2/ Read/Write1, 2 are different
from the community names set by SNMP
manager, a Trap command is sent.
PS Unit 1 Trap
Enable
Disable
Enable
Enable: If Power Supply Unit 1 failure
occurs, a Trap command is sent.
DC Power 1 Trap Enable
Disable
Enable
Enable: If DC power supply failure occurs
in Power Supply Unit 1, a Trap command is
sent.
PS Unit 2 Trap
Enable
Disable
Enable
Enable: If Power Supply Unit 2 failure
occurs, a Trap command is sent.
DC Power 2 Trap
Enable
Disable
Enable
Enable: If DC power supply failure occurs
in Power Supply Unit 2, a Trap command is
sent.
FAN Trap Enable
Disable
Enable
Enable: When conditions of fan 1 to 3 are
changed, a Trap is sent.

Slot Trap Settings
Slot1 to 12 Trap Enable
Disable
Enable
Enable: If communications between Slot1
to Slot12 with the control board are lost, a
Trap command is sent.