FOR-A USF-212PS, Руководство по эксплуатации, Страница: 28 / 40

28
10-3. Network Tab
Clicking the Network tab opens a window as shown below.
IMPORTANT
Setting changes performed in the Network Tab require the USF-212S to be restarted after they
are entered by clicking Apply.

WAN (LAN A) Settings
Network settings of WAN side (LAN A) port are set.
Item Factory Setting Description
IP Address
172.16.0.10
Sets the external LAN A IP Address.
(Setting Range: 10.0.0.0-10.255.255.255,
172.16.0.0-172.31.255.255,
192.168.0.0-192.168.255.255)
Subnet Mask
255.255.0.0
Sets the external LAN A Subnet Mask.
Default Gateway
0.0.0.0
Sets the external LAN A Default Gateway.
HTTP Base Port
55000
Sets the TCP/UDP port number through which the Web
GUI accesses to the external LAN A.
SNMP Base Port
56000
Sets the TCP/UDP port number through which the
SNMP Manager accesses to the external LAN A.
Control Base Port
57000
Sets the TCP/UDP port number through which
FA-10DCCRU Remote Control Unit accesses to the
external LAN A.
Example 1: To Display Slot 1 Module on the Web Browser by Addressing.
When the HTTP Base Port setting is 55000, input http://172.16.0.10:55001 in the address bar of the
web browser to display the Slot 1 module Web GUI.
Similarly, input http://172.16.0.10:55002 for Slot 2.
Example 2: To Get/Set Slot 1 Module via SNMP Manager
When SNMP Base Port setting is 56000, input 172.16.0.10 for the IP address. Input 56001 for the
SNMP port number.
Similarly, input 56002 for the port number of Slot 2.
Input values to change settings. The changes are
applied by clicking
Apply .
Set values are
indicated.