Foma D704i, Руководство пользователя, Страница: 489 / 498

36
AT+CMEE= [n] Specifies the error report format of the FOMA terminal.
☛
P39
n=0: Shows “ERROR”. (default and when parameter omitted)
n=1: Shows in the format of “+CME ERROR:xxxx”. (xxxx=numbers)
n=2: Shows in the format of “+CME ERROR:xxxx”. (xxxx=characters)
*1, *2 ex. Enter AT+CMEE=0 Display AT+CMEE? Test AT+CMEE=?
AT+CNUM
Shows the Own Number data of the FOMA terminal in the format of “+CNUM:, “number”,type”.
number: Phone number
type=129: Does not show “+81”. type=145: Shows “+81”.
ex. Enter AT+CNUM Display None Test AT+CNUM=?
AT+COPS=n,2,oper Sets search method for network operator to connect.
n=0: Auto (Searches network automatically to connect.) (default)
n=1: Manual (Connects to the network operator specified as oper.)
n=2: Cancels (Disconnects) the connection with the operator.
n=3: No mapping
n=4: When you cannot connect to the operator specified as oper, search automatically to connect.
oper: Sets PLMN Number in hexadecimal value.
ex. Enter AT+COPS=1 Display AT+COPS? Test AT+COPS=?
AT+CPAS Displays whether the FOMA terminal can send and receive AT commands to external devices in
“+CPAS:n” format.
n=0: Possible n=1: Impossible n=2: Unknown n=3: Possible and receiving
n=4: Possible and communicating
ex. Enter AT+CPAS Display None Test AT+CPAS=?
AT+CPIN=“pin”
[,“newpin”]
Enters these codes when entry of PIN/PIN2 code or PUK is requested. Entry of “AT+CPIN?” displays
the current status in the “+CPIN:code” format. Execute AT+CPIN=“pin”[,“newpin”] by specifying pin or
newpin depending on the value of code as follows:
ex. Enter AT+CPIN=“0000” Display AT+CPIN? Test AT+CPIN=?
AT+CR= [n] Specifies whether to display the communication type (packet communication or 64K data
communication) before
CONNECT
is displayed, during line connection.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information in the format of “+CR:serv”.
serv=SYNC: 64K data communication serv=GPRS: Packet communication
*1, *2 ex. Enter AT+CR=0 Display AT+CR? Test AT+CR=?
AT+CRC= [n] Specifies whether to use result codes of “+CRING:type” for incoming calls.
n=0: Does not use the result code of “+CRING:type”. (default and when parameter omitted)
n=1: Uses the result code of “+CRING:type”. The example of codes are as follows:
Packet communication
…
+CRING:GPRS “PPP”,,,“mopera.net”
64K data communication … +CRING:SYNC
*1, *2 ex. Enter AT+CRC=0 Display AT+CRC? Test AT+CRC=?
AT+CREG= [n] Specifies whether to show the “inside/outside the service area” information.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information.
If you enter “AT+CREG?”, it shows the information in the format of “+CREG:n,stat”.
stat=0: Outside the service area stat=1: Inside the service area (home) stat=4: Unknown
stat=5: Inside the service area (visitor)
*1, *2 ex. Enter AT+CREG=0 Display AT+CREG? Test AT+CREG=?
AT+CUSD=n,“str”[,0] Inquires and sets for additional service (USSD) of Network Services.
n=0: Does not answer mid result. (default)
n=1: Displays mid result in “+CUSD:m,“str”,0” format.
m=0: Information not requested m=1: Information requested
str: Service code provided by DoCoMo
ex. Enter AT+CUSD=1,
“
＊
148
＊
1
＊
0000#”,0
Display AT+CUSD? Test AT+CUSD=?
AT+FCLASS=0 Sets communication type supported by the FOMA terminal (The setting is not changeable).
Only data supported.
*1, *2 ex. Enter AT+FCLASS=0 Display AT+FCLASS? Test AT+FCLASS=?
Command Description & Parameter
Code Status pin newpin
READY Entry of code not requested
SIM PIN Entry of PIN code waited PIN code None
SIM PIN2 Entry of PIN2 code waited PIN2 code None
SIM PUK PIN locked PUK New PIN code
SIM PUK2 PIN2 locked PUK New PIN2 code
Next
▲
D704i_E_Manual.fm 36 ページ ２００７年７月１２日 木曜日 午後１２時２７分