Foma D704i, Руководство пользователя

Страница: 428 / 498

426 Appendix/External Devices/Troubleshooting
■ Selecting from other than options
displayed:
a
Select
Others
b
Select preferred day
c
Select preferred time-slot
Connection is made to the server and the
options close to preferred day and time-slot
are displayed.
･
If there are more than 1 option page for
preferred time-slot, switch to the next or
previous page with
&
.
･
Press
p
to display the description of
the symbol on the left of time-slot.
d
Select preferred day and time
z
Yes
･
If there are more than 1 option page for
preferred day and time, switch to the next
or previous page with
&
.
3
o
Reservation is completed and the menu is displayed.
･
is shown on the standby display when
reservation is made.
1
m864
2 Enter the terminal security code
z
Check
the contents
■
Changing reservation:
a
Select
Change
A confirmation screen for sending your
terminal ID is displayed.
b
o
The option selection screen is displayed.
･
Follow the procedure from Step
b
in
“Selecting from other than options
displayed”.
･
Pressing
o
on the confirmation screen
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
■ Canceling reservation:
a Cancel
z
Yes
A confirmation screen for sending your
terminal ID is displayed.
b
oo
The reservation is canceled and the menu
is displayed.
･
Pressing
o
on the confirmation screen
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
When the reserved time arrives, the screen as shown
below is displayed and updating software is started
automatically in about 5 seconds. Before the
reserved time, make sure that the battery is fully
charged and the handset is in a location where radio
waves reach and then show the standby display.
When downloading is completed, rewriting software
is automatically started, followed by reload.
INFORMATION
●
Note that updating software may not be activated even
though the reserved time arrives in case of using the
other functions. In case the reserved time arrives while
talking or receiving messages, updating software starts
after finishing talking or receiving messages.
●
If software update is executed when
ON
is set for PIN1
Code On/Off, the PIN code entry screen will be displayed
at the time of automatic reload after completion of
software updating. You cannot make/receive calls and
operate communication functions if the incorrect PIN1
code is entered.
●
If an alarm clock or any alarm is set for the same time,
the alarm clock or the alarm takes precedence and the
software update may not be started.
●
In case Delete All Data (
☛
P359) is executed after
completing reservation, software update is not started
even though the reserved time arrives. Make a
reservation for software update again.
Checking/changing/canceling reservation
Availability for reservation at
each time-slot will be shown:
○
: Available
△
: Barely available
･
To stop checking:
Select
OK
When the reserved time arrives
･
To cancel the software
update:
f z
Yes