Foma D704i, Руководство пользователя

Страница: 488 / 498

35
AT ＊ DGPIR=n Specifies whether to notify the caller ID for packet communication. This specification is effective both
for incoming and outgoing calls.
n=0: The APN is used as it is when a packet communication is established. (default)
n=1: Adds “184” to the APN when a packet communication is established.
n=2: Adds “186” to the APN when a packet communication is established.
ex. Enter AT ＊ DGPIR=0 Display AT ＊ DGPIR? Test AT ＊ DGPIR=?
AT ＊ DRPW Shows the level of power reception in the format of “ ＊ DRPW:m”, where the value of m ranges from 0
to 75.
ex. Enter AT ＊ DRPW Display None Test AT ＊ DRPW=?
+++ Changes the FOMA terminal mode from the online data to the online command. The duration of
escape guard is fixed to 1 sec.
ex. Enter +++ Display None Test None
AT+CAOC Displays last call cost.
ex. Enter AT+CAOC Display AT+CAOC? Test AT+CAOC=?
AT+CBC Displays the FOMA terminal’s battery level in the “+CBC:bcs,bcl” format.
bcs=0: Powered by the battery pack
bcs=1: Not powered by the battery pack
bcs=2: Battery pack removed
bcs=3: Power-supply error
bcl=0: No battery remained or battery pack removed
bcl=1 to 100: Battery remained
ex. Enter AT+CBC Display None Test AT+CBC=?
AT+CBST=n,1,0 Sets the line to use (Setting of bearer service).
n=116: 64K data communication (default)
n=134: 64K videophone
*1, *2 ex. Enter AT+CBST=116,1,0 Display AT+CBST? Test AT+CBST=?
AT+CEER Shows a disconnection reason of the previous communication.
☛
P39
ex. Enter AT+CEER Display None Test AT+CEER=?
AT+CGDCONT Specifies the APN for packet communication.
☛
P39
AT+CGEQMIN Specifies the criteria for judging whether to approve the QoS (Quality of Service) level provisioned by
the network when the packet communication is established.
☛
P39
AT+CGEQREQ Specifies the QoS level requested to the network when transmission is performed during packet
communication.
☛
P40
AT+CGMR Shows the version of your FOMA terminal with a 16-digit number.
ex. Enter AT+CGMR Display None Test AT+CGMR=?
AT+CGREG= [n] Determines whether to notify the network registration state. Either “inside the service area” or “outside
the service area” is notified.
n=0: Not notified. (default and when parameter omitted)
n=1: Notified in the format of “+CGREG:n,stat”.
stat=0: Outside the service area stat=1: Inside the service area (home) stat=4: Unknown
stat=5: Inside the service area (visitor)
*1, *2 ex. Enter AT+CGREG=1 Display AT+CGREG? Test AT+CGREG=?
AT+CGSN Shows the manufacturer’s serial number of the FOMA terminal.
ex. Enter AT+CGSN Display None Test AT+CGSN=?
AT+CLIP= [n] Specifies whether to show the caller ID of an incoming 64K data communication on the PC’s screen.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information.
If you enter “AT+CLIP?”, it shows “+CLIP:n,m”.
m=0: The network setting that does not show caller ID to the other party when originating a call.
m=1: The network setting that shows caller ID to the other party when originating a call.
m=2: Unknown
*1, *2 ex. Enter AT+CLIP=0 Display AT+CLIP? Test AT+CLIP=?
AT+CLIR= [n] Specifies whether to show your caller ID to the other party when you originate a 64K data
communication.
n=0: In accordance with the service agreement. (when parameter omitted)
n=1: Does not notify the caller ID.
n=2: Notifies the caller ID. (default)
If you enter “AT+CLIR?”, it shows “+CLIR:n,m”.
m=0: CLIR is not activated. (caller ID always notified)
m=1: CLIR is activated. (caller ID always not notified)
m=2: Unknown m=3: CLIR temporary mode (default for “not notified”)
m=4: CLIR temporary mode (default for “notified”)
ex. Enter AT+CLIR=0 Display AT+CLIR? Test AT+CLIR=?
Command Description & Parameter
Next
▲
D704i_E_Manual.fm 35 ページ ２００７年７月１２日 木曜日 午後１２時２７分