Foma D704i, Руководство пользователя

Страница: 418 / 498

416 Appendix/External Devices/Troubleshooting
Invalid data. Unable to save.
The downloaded data cannot be
saved because the data is invalid.
Invalid File. (493)
Cannot be obtained due to an invalid
file.
Invalid microSD. Unable to
use Digital Rights
Management function.
The authentication area in the
microSD memory card could not be
referred due to some cause.
The data of Movable Contents
cannot be saved in the microSD
memory card in which an error has
occurred.
Invalid UIM. Download not
possible.
This message appears in case the
information of UIM inserted is
different from the UIM information
registered on IC card.
Invalid UIM, incorrect display.
Cannot be displayed correctly
because of inserting a UIM different
from the one you were using when
you stored mail templates. Use the
same UIM as the one you were
using when downloading or saving.
Invalid UIM or phone
type.Unable to use.
Video/i-motion cannot be played
because the different UIM from that
used when saved is inserted or the
model is different.
Invalid UIM, requested
service not available.
Operation is unavailable due to the
function of UIM operation restrictions.
Insert the same UIM as used when
those data or files were saved to use
it.
Invalid UIM, requested
software failed to start.
The specified i-
α
ppli cannot be started
due to the function of UIM operation
restrictions. Insert the same UIM as
used when the i-
α
ppli was
downloaded to use it.
Invalid UIM. start not
possible.
This message appears in case the
information of UIM inserted is
different from the UIM information
registered on IC card.
Invalid UIM. Upgrade not
possible.
This message appears in case the
information of UIM inserted is
different from the UIM information
registered on IC card.
Is the ToruCa automatic
reading function in a mobile
phone used through the
reader/writer?
ToruCa Auto-read is set to
OFF
.
Select
Yes
and set to
ON
and you
can use the auto read function.
Memory is full. Unable to
save.
The FOMA terminal does not have
enough memory space and cannot
be saved. Delete i-mode Mail or
SMS.
Memory shortage. Quit
application.
The running function is terminated
due to insufficient memory.
Memory shortage Return to
Main Menu.
The processing is interrupted due to
insufficient memory.
Message kept in center.
SMS messages have already been
sent.
microSD damaged. Saving to
phone memory.
When
microSD
has been set as the
destination for saving still images or
videos but the microSD memory
card cannot be accessed, the
destination automatically switched to
Phone
.
microSD full. Saving to
phone memory.
When the microSD memory card
becomes full with
microSD
set as the
destination for saving still images or
videos recorded with the camera or
Chara-den, the destination is
automatically switched to
Terminal
.
microSD memory full.
Copying, moving, backup of data
and update of information are not
allowed because the storage space
in the microSD memory card is not
enough. Perform the operation to
display the data of microSD memory
card and delete unnecessary data.
☛
P302
New pattern definitions for
scanning function available.
Please update.
Auto-update of the pattern definition
was unsuccessful. Update the
pattern definition manually.
☛
P428
No assigned channel.
The channel cannot be viewed
because the service is suspended,
etc.
No content is available.
(204)
Could not find data at the specified
site.
No microSD.
Data cannot be saved or operated
because a microSD memory card is
not inserted to the FOMA terminal.
Insert the microSD memory card
before operating.
☛
P299
No requested software.
The i-
α
ppli specified by the mail and
external equipment is not stored in
your FOMA terminal.
No response. (408)
Communication was disconnected
because there was no response
from i-mode sites or websites within
the specified time. Retry later.
No space to attach file.
Exceeds the maximum number of
files attachable to 1 mail.
No space to attach
signature.
･
The signature cannot be inserted
because of exceeding the
maximum characters.
･
The signature cannot be inserted
in SMS because it is decorated.
･
The signature cannot be inserted
when
English
is set for
Font type
in
SMS Setting. Change
Font type
to
Japanese
.
☛
P227