FOM INDUSTRIE BLITZ, Руководство по эксплуатации и обслуживанию

Страница: 72 / 152

66
G B G B G B G B G B
BLITZ
10.2
PERIODIC MAINTENANCE
- Carefully oil all the exposed mechanical parts (ex. guideways, work table, etc.)
- Clean the chips from under the guideway covers “A” - Fig. 10-03 with a suction hose to prevent the chips
from building up around the fixed head when the mobile head moves in, with consequent difficulties also
during the machine calibration phase.
- Approx. every 200 working hours it is necessary to grease, through the nozzles “1” - Fig. 10-04A / Fig.
10-04B (2), and using the syringe supplied, the recirculating ball screws used to tilt the head.
Approx. every 200 working hours it is necessary to grease, through nozzles “2” - Fig. 10-04B (4) also
the recirculating ball screws with the syringe supplied.
For each lubrication, pump just once with average force during the operation.
The specifications of the grease to use are given in Table 10-01 .
GREASE SPECIFICATIONS
Type of soap Lithium - calcium
Work penetration 60 double strikes
(ASTM D 217) 400 – 430 mm/10
Drop point
(ASTM D 566)
165° C
Corrosive to copper
(IP 112 b 5)
Negative
Emcor test Passed
FOM spare part code for grease:
ET-77906
in 1 Kg. packs.
10-03
Table 10-01
A