FOM INDUSTRIE BLITZ, Руководство по эксплуатации и обслуживанию

Страница: 62 / 152

56
G B G B G B G B G B
BLITZ
9.9 CLAMPING PROFILES
Efficient profile clamping is obtained (given the precise positioning, see previous paragraph) by checking the
clamping position of the pads - vice cylinders.
With reference to the main drawing (
Fig .09-21 ) it should be noted that the height and crossways adjustment
of the vices is carried out in such a way as to clamp the profile in the way shown or in any case in the areas
with most ribbing on the profiles.
The profile must make perfect contact with the work table and the vice jaw.
Nevertheless, for cutting lengths over 2 metres, the use of the intermediate profile support is
recommended (
OPTIONAL ). This is to prevent the profile bowing downwards in the middle with consequent
measurement errors that may arise.
NOTE : As already described in the Chap.VICE - POSITIONING/ADJUSTING the vice pad ( B - Fig. 09-21 ) is
worthy of a separate description. The pad has a special kind of articulation with a movement that tends
to adapt itself to the shape of the profile to be cut and which distributes part of the horizontal clamping
force in the direction of the worktable (downwards). For this reason it must be checked that the arrow
printed on the pad is always facing upwards (perpendicular to the worktable)..
09-21
A Vice cylinders
A
B