10
GB
Operating instructions - mobiSERVE
CAUTION
■
■
Never operate the mobiSERVE without a fluid for more than 2 minutes.
Your urea pump may be damaged by dry running.
■
■
It is forbidden to operate the unit with defective equipment.
Press the nozzle valve lever up according to the delivery rate desired or actuate the lock.
Operate the rocker switch to turn the mobiSERVE on.
Placing and filling the barrel:
Suitable devices are to be used to lift the urea container onto the space provided for it on the mobi-
SERVE. Check to ensure that the whole surface is used, because otherwise there is the risk that the urea
container may fall backwards out of the trolley. In addition, the urea container must be secured against
falling out.
200 liter mobiSERVE
25 352
■
■
Place the 200 l barrel on the load area of the trolley. Actuate the parking brakes
of the two castors in order to ensure a secure and safe standing position.
■
■
Insert the suction line into the barrel and connect the screw coupling and the
barrel thread.
■
■
Tighten the union nut in order to connect the preassembled hose and the
suction line in the barrel. Check to ensure that the O-rings are not damaged at
the connection.
■
■
For an exchange of barrels, proceed in reverse order.
60 liter mobiSERVE
25 353
■
■
The 60 l trolley is equipped with a plastic container. The suction hose and the
connecting hose are already preassembled in the barrel.
■
■
You have the possibility to fill the container by an external filling operation. The
suction hose is equipped with a SEC adapter, so that the container can be filled
by means of the pump in the trolley.
■
■
To do this, connect the SEC adapter to the existing IBC container.
■
■
Open the red screw cap at the trolley container and insert the nozzle into this
opening.
■
■
Turn the rotary knob for flow control to 100 %.
■
■
Switch the main switch on. The pump starts to work now.
■
■
Open the nozzle valve and actuate the lock. The nozzle valve will automatically
close when the container is full.
■
■
Then, shut off the main switch and reconnect the SEC adapter to the suction
line of the trolley container.
NOTE
In case of a refilling or after an exchange of a barrel, completely bleed the air
from the system, in order to avoid measuring errors in the electronic counter
system.
■
■
To do this, open the second opening of the trolley container and insert
the nozzle valve. Perform a filling operation as described under paragraph
5.1 until the medium is delivered without air.
The mobiSERVE is now ready for use.
