6
GB
Operating instructions - mobiSERVE
2.1 Authorized personnel
Only qualified and authorized persons are allowed to operate and to work on the mobiSERVE.
Persons are qualified if they are, due to their training, experience, instruction and knowledge of the
relevant standards, able to assess assigned tasks and to identify potentially hazardous situations.
These persons must have been authorized by the person responsible for the safety of the unit and must
be able to identify and to avoid potential dangers.
All persons charged with installation, operation, maintenance and repair work, must have read and
understood this operation manual.
A copy of this operating manual must be stored permanently and ready at hand at the place of usage
of the unit.
2.2 Notes on cleaning and repair
WARNING
■
■
Wear suitable gloves as a protection against long-term skin contact with
urea solution.
■
■
The mobiSERVE is allowed to be cleaned by instructed personnel only.
■
■
When handling urea solutions, adhere to the information provided on the
material data safety sheet.
2.3 Intended conditions of use
The mobiSERVE urea conveying system has been designed for conveying urea solutions (urea, AdBlue®)
or water from mobile tanks into containers provided for this purpose, for example vehicle tanks.
The urea conveying system is operated independently of the mains power.
The mobiSERVE is suitable for use in workshops.
WARNING
Never use it to deliver explosive fluids such as gasoline or other flu-
ids with similar flashpoints!
The mobiSERVE is only allowed to be connected to an appropriate voltage source (see type plate).
Conveying caustic or other hazardous chemical or biological substances is forbidden.
The use in the food industry is forbidden.
Any departure from the usage stipulations (other fluid media, use of force) or user modifications
(changes, use of non-original parts) can be dangerous and is considered as non-intended usage.
The user is liable for any damage resulting from non-intended use.
During repairs to any electrical components, the appropriate safety and test requirements are to be
observed.
Only genuine replacement parts are to be used for any repairs, because otherwise the warranty will be
invalidated.
2.4 Risks when handling the mobiSERVE
Any application beyond the intended use can lead to hazardous situations and shall be regarded as non-
intended use.
