Fluke CableAnalyzer DSX-5000, Техническое справочное руководство, Страница: 560 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
524
To make a cable ID set for tests on fiber cabling
4-4.
On
PROJECT
screen, tap
NEW ID SET
.
4-5.
For this tutorial, you will make an ID set that has 10 IDs for 5
duplex fiber links:
a. On the
CABLE ID SETUP
screen (Figure 198 on page 526),
tap the box under
First ID
, use the keyboard to enter 1A.
b. Tap the box under
Last ID
, use the keyboard to enter 5B,
then tap
DONE.
c. Under
Select Media,
tap
Fiber
. The screen shows the tests
you can do with the OptiFiber Pro and CertiFiber Pro
modules. The tester uses these settings to calculate how
many tests you have completed in the project.
d. Tap
End 1
and
End 2
for the
OTDR
test and tap the
Loss/
Length
test.
Note
You can use ID sets you make for fiber media only
when you do tests on fiber cabling.
e. Tap
REVIEW
. The
CABLE ID REVIEW
screen shows the ID
set, the total number of IDs, and the tests you specified
for the ID set.
4-6.
To save the ID set, tap
SAVE
on the
CABLE ID REVIEW
screen.
4-7.
On the
PROJECT
screen, delete the default ID set
Next ID:
001
.