Fluke CableAnalyzer DSX-5000, Техническое справочное руководство, Страница: 558 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
522
Step 4: Make ID Sets for Twisted Pair and Fiber Cabling
To see the CABLE ID SETUP screen

On the home screen, tap the
PROJECT
panel, then tap
NEW ID
SET
on the
PROJECT
screen.

Or, on the home screen, tap the
Next ID
panel, tap
CHANGE
CABLE IDs
, then tap
NEW ID SET
on the
CHANGE CABLE IDs
screen (see Figure 197 on page 525).
When you make cable ID sets, you set up these items for the
project (see Figure 198 on page 526):
 Sets of IDs to use when you save test results. For example, you
can make one set of IDs for multimode fibers and another for
twisted pair copper cables.

For projects that use an OptiFiber Pro or CertiFiber Pro
module, you specify the tests to do for each ID. As you use the
project, the tester shows the percentage of the necessary tests
you have completed. It also shows the IDs that do not have
results for each test.
For this tutorial, your project will include ID sets for 12 twisted
pair cables and 10 fiber optic cables (5 duplex fiber links). It is not
necessary to attach a copper or fiber module before you set up an
ID set for that module.
To make a cable ID set for tests on twisted pair cabling
4-1
On the home screen, tap the
PROJECT
panel, then tap
NEW
ID SET
on the
PROJECT
screen.
4-2.
For this tutorial, you will make an ID set that has 12 IDs for
twisted pair cabling:
a. On the
CABLE ID SETUP
screen (Figure 198 on page 526),
tap the box under
First ID
, use the keyboard to enter B-00
.