Fluke CableAnalyzer DSX-5000, Техническое справочное руководство, Страница: 495 / 700

Chapter 12: The OptiFiber Pro HDR OTDR Module
Real Time Trace
459

Tap the settings you want. You can scroll some columns to see
more settings. Table 15 on page 406 gives descriptions of the
settings.
 Select the wavelengths to use for the test.
 The
SAVE SETUP
button lets you save your settings:
Active
: The tester saves the settings in the active test setup. If
the test was not a
Manual
test, the tester changes the active
Test Type
to
Manual
.
Note
Active does not show if the wavelengths on the
screen (

) are not available in the active test
setup. For example, Active does not show when
you have the OptiFiber Pro HDR OTDR module
installed, but the active test setup is for an
OptiFiber Pro module.
New
: The tester saves the settings in a new test setup that is
added to the project. The new setup is a
Manual PON OTDR test
or a
Manual OTDR
test.
If you save your settings in a new test setup
:
The tester uses your settings until you save the results or exit the
results screen then start a test from the home screen. Then the
tester uses the test setup it had before you changed the settings.
If you do not save your settings
:
The tester uses your settings until you save the results or exit the
results screen then start a test from the home screen. Then the
tester uses the test setup it had before you changed the settings.

Tap
TEST
or press

to do a test with the settings you
selected.
The
PROGRESS
screen shows
Manual PON OTDR
when the
tester uses your settings.