Fluke A3003 FC, Руководство по калибровке

Страница: 7 / 24

Wireless DC Clamp
Safety Information
3
For safe operation and maintenance of the Product:

Remove batteries to prevent battery leakage and damage to the Product if it is
not used for an extended period.

Repair the Product before use if the battery leaks.

Be sure that the battery polarity is correct to prevent battery leakage.

Batteries contain hazardous chemicals that can cause burns or explode. If
exposure to chemicals occurs, clean with water and get medical aid.
W
Caution
To prevent possible damage to the Product or to equipment under test:

Use the correct terminals, function, and range for measurements.

Clean the case and accessories with a damp cloth and mild detergent only. Do
not use abrasives or solvents.
Note
The Measurement Category (CAT) and voltage rating of any combination of test probe,
test probe accessory, current clamp accessory, and the Product is the LOWEST rating
of any individual component.
The symbols in Table 1 are used on the Product or in this manual.
Table 1. Symbols

Consult user documentation.
W
WARNING. RISK OF DANGER.
X
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
-
Do not apply around or remove from uninsulated hazardous live conductors without taking
additional protective measures.
,
Application around and removal from uninsulated hazardous live conductors is permitted.
T
Double Insulated

Battery

DC (Direct Current)

Conforms to relevant Australian EMC standards.
)
Certified by CSA Group to North American safety standards.
P
Conforms to European Union directives.

Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building’s low-voltage MAINS installation.

Measurement Category IV is applicable to test and measuring circuits connected at the source of
the building’s low-voltage MAINS installation.
~
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types in the WEEE Directive Annex I,
this product is classed as category 9 “Monitoring and Control Instrumentation” product. Do not
dispose of this product as unsorted municipal waste.
Symbol Description