Fluke 9000A-Z80QT, Инструкция по эксплуатации

Страница: 96 / 108

ZBOQT
Table
A-2.
ZBOQT
Pod Sync CalibrationData
SYNC MODE UUT SIGNAL EDGE OF SIGNAL OFFSET FROM EDGE
ADDR
R_—Q
Rising
-45 ns
DATA RD
Rising
-45
ns
A-8.
Available
TL/1
Support Programs
The following list describes the
available
TL/l
support programs
for the
Z80QT
Pod.
QWK_F|LL
This
program
embodies all
of
the functions
of
the Z80QT pod Quick Fill and
Verify test.
For further informationabout
the usage
of
the Quick Fill and Verify
test, see
Section
3-16.
The major difference between the test
that
Section 3-16
describes and
the test that
is
implemented by the
QWK_FILLTL
/
1
program
is
that the TL /
1
program
only allows
the
Quick Fill and Verifytest
to be executed
in the mainframe’s
current address space.
Arguments:
ADDR
This is the starting address
of
the Quick Fill test. The allowed range
of
values
for ADDR
is 0 through FFFF.
UPTO
This is the ending address
of
the Quick Fill test. The allowed range of
values
for UPTO
is 0 through FFF F. UPTO’s value must be
greaterthan
or
equal to
that of ADDR.
DATA
This is the
data that
is
to be verified
or
written by the Quick Fill test.
DATA may be any numeric value between
0
and FF.
ADDRSTEP
This
is
the address increment
for
the Quick Fill test. If
ADDRSTEP
has
the value zero, the Quick Fill test
will default to
a one byte address
increment. ADDRSTEP
must
not
be
greater than
F.
A-4