FLIR intelliRock III Скачать руководство пользователя страница 57

Страница: 57 / 69

intelliRock technical support:

Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST

Using the intelliRock Wireless Remote

The intelliRock wireless remote box is an optional accessory that enables remote collection of

thermal or strength data from up to eight loggers. It is ideal for use in when logger placements

are distant, remote, or difficult to reach by a user with an intelliRock reader.

The wireless remote is a rugged, weatherproof box that at preset intervals will automatical-

ly transmit data from connected loggers to the intelliRock cloud software through an LTE 4G

cellular connection. For areas with poor or no cellular reception, 900 MHz radio connectivity

is also supported and requires the use of the base station accessory shown in Figure 5.6. For

European users, 3G wireless connectivity is available, with 4G planned in the future. However,

900 MHz connectivity is not offered in the European market, but 2.4 GHz is planned.

Figure 7.1: The intelliRock wireless remote box.

Remote boxes will not come from the manufacturer fully charged, so the first thing users

should do is charge the box. Use the cable and charger provided to plug the box into an electri-

cal outlet for charging. The lights on the charger will indicate the charging status as shown in

Figure 7.2.

Figure 7.2: Wireless remote charger with a green light indicating that the box is fully charged.

Содержание intelliRock III






































































Результаты поиска

Содержание intelliRock III

Отзывы:

Похожие инструкции для intelliRock III

Бренды по названию

Популярные бренды

FLIR intelliRock III, Инструкция по эксплуатации

Результаты поиска

Содержание intelliRock III

Отзывы:

Похожие инструкции для intelliRock III

Бренды по названию

Популярные бренды