FLIR intelliRock III, Инструкция по эксплуатации

Страница: 16 / 69

16
intelliRock® III– Operating Instructions Guide
Using the intelliRock III Reader
To use the intelliRock III reader, press and hold the power button for about three seconds. The
reader should power on and display the splash screen shown in Figure 3.1.
Figure 3.1: The intelliRock III reader splash screen.
After powering up, the reader will display a screen similar to the one shown in Figure 3.2.
Figure 3.2: Initial display after reader power-up.
The reader display is organized into distinct display areas:
• The top line of the reader screen will display the time, date and battery status.
• The second line of the screen shows the status of any connected logger and its seri-
al number. If no logger is connected to the reader, the display will read “No Logger” as
shown in Figure 3.2.
• The center and largest part of the screen is the main display area. In Figure 3.2, the dis-
play area is blank.
• The bottom line of the screen displays the menu options, selectable using the function
keys on the keyboard. In Figure 3.2, the only available menu option is “Setup.”
intelliRock III Reader Setup
The first time the reader is powered on, you will need to select the Setup (F5) menu option to
enter default settings. The screen shown in Figure 3.3 will appear.