FLIR FLIR T5 series, Руководство пользователя

Страница: 35 / 115

Handling the camera 7
You can assign different functions to the programmable buttons. You can, for example,
use a programmable button to easily switch between two settings you use often. You can
also choose to define two different setups for saving and previewing: the usual setup for
the Save button (which is defined by the
Save options and storage settings, see section
23.4 Save options & storage ) and another setup for a programmable button.
To assign a function to a programmable button, do the following:
1. Push and hold the programmable button. This displays the Programmable button
menu.
2. Push the navigation pad up/down to select one of the functions. Push the center of
the navigation pad to confirm.
7.11.1 Programmable button options
Available options for the programmable buttons:
• No action : This is the default setting. Nothing will happen when you push the button.
• Switch Auto <> Manual temperature scale : Switch between automatic or manual im-
age adjustment mode. For more information, see section 11.3 Adjusting the infrared
image .
• Autofocus : One-shot autofocus of the infrared camera.
• Continuous autofocus 1 : Switch between the enabled/disabled continuous autofocus
functions.
• Hide image overlay graphics : Switch between hide/show all overlay graphics and im-
age overlay information. For more information, see section 11.8 Hiding all overlay .
• Calibrate : Perform a manual NUC. For more information, see section 11.7 Performing
a non-uniformity correction (NUC) .
• Auto-adjust the manual temperature scale : Perform an automatic adjustment of the
image while remaining in manual image adjustment mode.
• Switch Thermal <> Digital camera
1
: Switch between the image modes Thermal and
Digital camera . For more information, see section 12 Working with image modes .
• Switch Thermal <> Thermal MSX : Switch between the image modes Thermal and
Thermal MSX . For more information, see section 12 Working with image modes .
• Switch 1x zoom <> Max zoom : Switch between the digital zoom factor of 1× and max-
imum zoom.
• Switch camera flash On <> Off : Switch between the enabled/disabled camera flash
functions. For more information, see section 7.12 Using the camera lamp as a flash .
Note The flash function will not be activated if the setting Lamp & laser is set to the
option Disable all . For more information, see section 23.5 Device settings .
• Switch single shot <> Video : Switch between the recording modes Single shot and
Video .
• Switch between two latest palettes : Switch between the two last-used color palettes.
For more information, see section 11.5 Changing the color palettes .
• Switch temperature range : Cycle through the camera temperature ranges. For more
information, see section 23.3 Camera temperature range .
• Switch screen rotation On <> Off : Switch between enabled/disabled screen rotation.
• Save : Save an image.
• Save + Prompt for note : Save an image and display the note annotation tool.
• Save + Prompt for table : Save an image and display the table annotation tool.
• Save + Prompt for voice annotation : Save an image and display the voice annotation
tool.
• Save + Prompt for sketch : Save an image and display the sketch annotation tool.
• Save + Select annotation from menu : Save an image and display the annotation tool
menu.
• Preview : Display a preview image.
• P Prompt for note : Display a preview image and the note annotation tool.
• P Prompt for table : Display a preview image and the table annotation tool.
#T810253; r. AL/84068/84441; en-US 28
1. This item is dependent on the lens model.