•
P Prompt for voice annotation
: Display a preview image and the voice annota-
tion tool.
•
P Prompt for sketch
: Display a preview image and the sketch annotation tool.
•
P Select annotation from menu
: Display a preview image and the annotation
tool menu.
7.12
Using the camera lamp as a flash
Note
The availability of this feature is dependent on the lens model.
The camera lamp can be used as a flash for the digital camera. When the flash function
is enabled, the camera lamp will flash when an image is saved by pushing the Save
button.
You can also turn on the camera lamp to use it as a flashlight.
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(
Settings
) and push the navigation pad. This displays the
Settings
menu.
3. Use the navigation pad to select
Device settings
>
Lamp & laser
.
4. To use the camera lamp as a flash, do one of the following:
• To enable the camera lamp function, select
Enable lamp & laser
and push the nav-
igation pad. To turn on/off the camera lamp, touch the soft button
or use the
swipe-down menu.
• To enable the flash function, select
Enable lamp & laser + Use lamp as flash
and
push the navigation pad.
• To disable the camera lamp and flash functions, select
Disable all
and push the
navigation pad.
Note
You can also assign the function
Switch camera flash On <> Off
to one of the pro-
grammable buttons. For more information, see section 7.11
7.13
Calibrating the compass
It is recommended that the compass is calibrated every time you move the camera to a
new location.
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(
Settings
) and push the navigation pad. This displays the
Settings
menu.
3. Use the navigation pad to select
Device settings
>
Geolocation
>
Compass
.
4. Make sure the compass is enabled by toggling the switch.
5. Select
Calibrate compass
and push the navigation pad. Follow the on-screen
instructions.
Note
You must rotate the camera slowly.
7.14
Changing camera lenses
Note
If the new lens has not been used with the camera before, the lens–camera com-
bination must be calibrated after the lens has been mounted. See section 7.15
ing the lens–camera combination
for information on how to do this.
Note
Do not touch the lens surface when you change lenses. If this happens, clean the
lens according to the instructions in 24.2
#T810253; r. AL/84068/84441; en-US
29