Working with measurement tools
13.7
Displaying a graph
For the line tool, you can set the camera to display a graph.
Note
You can display a graph when previewing an image, when defining user presets,
or when editing an image in the archive.
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the navigation pad—or touch and hold the tool. This displays a context menu.
3. Use the navigation pad to select
(
Graph/Max/Min/Avg
).
4. Push the navigation pad. This displays a submenu.
5. Select
(
Graph
).
6. Push the navigation pad to toggle the function between inactive and active.
7. When completed, push the navigation pad down to close the submenu.
8. Select
(
Done
) and push the navigation pad.
13.8
Creating and setting up a difference
calculation
A difference calculation gives the difference between the values of two known measure-
ment results.
Note
• You can set up a difference calculation when previewing an image, when defining user
presets, or when editing an image in the archive.
• This procedure assumes that you have previously laid out at least one measurement
tool on the screen.
Follow this procedure:
1. To set up a difference calculation, do the following:
• If you are defining user presets, select
(
Add measurement
) and then select
(
Add delta
).
• If you are editing an image in the archive, select
(
Measurement
) and then se-
lect
(
Add delta
).
2. Push the navigation pad. This displays a dialog box where you can select the meas-
urement tools that you want to use in the difference calculation. You can also select a
fixed-temperature reference.
3. Push the navigation pad. The result of the difference calculation is now displayed on
the screen.
13.9
Setting a measurement alarm
13.9.1
General
You can make the camera trigger an alarm when certain measurement conditions are
met.
13.9.2
Types of alarm
You can choose between the following alarm types:
#T810253; r. AL/84068/84441; en-US
64
