Working with measurement tools
13.1
General
To measure a temperature, you can use one or more measurement tools, e.g., a spot-
meter or a box.
13.2
Adding/removing measurement tools
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(
Measurement
) and push the navigation pad. This displays a submenu.
3. Use the navigation pad to select one of the following:
• Select
(
No measurements
) to remove all tools.
• Select
(
Center spot
) to add a center spot.
• Select
(
Hot spot
) to add a hot spot detection within a box area.
• Select
(
Cold spot
) to add a cold spot detection within a box area.
• Select
(
User preset 1
) to add user preset 1. (Not available in all camera
models.)
• Select
(
User preset 2
) to add user preset 2. (Not available in all camera
models.)
4. Push the navigation pad to confirm and exit the menu mode.
13.3
Editing user presets
A user preset is a measurement tool, or a group of measurement tools, with predefined
characteristics.
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(
Measurement
) and push the navigation pad. This displays a submenu.
3. Use the navigation pad to select
(
User preset 1
) or
(
User preset 2
).
#T810253; r. AL/84068/84441; en-US
59
