Flexim FLUXUS WD, Руководство по эксплуатации

Страница: 114 / 174

14 Outputs
14.1 Configuration of a binary output
FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
114
Output function test
The function of the output can now be tested.
• Connect a multimeter to the output.
• Select
Yes
to test the output. Select
No
to display the next menu item.
• Press ENTER.
• Select
On
to test the energized state of the output.
• Press ENTER.
The value has to be low ohmic.
• Select
Off
to test the de-energized state of the output.
• Press ENTER.
The value has to be high ohmic.
• Select
Repeat
to repeat the test,
Finish
to display the next menu item.
• Press ENTER.
.
• Select
Yes
to test the status of the output signal. Select
No
to display the next menu item.
• Press ENTER.
• Select in the scroll list
Status OK
or
Status error
.
• Press ENTER.
Depending on the selected switching condition, the value has to be either high or low ohmic.
• Select
Repeat
to repeat the test,
Finish
to display the next menu item.
• Press ENTER.
14.1.2 Output of the event value
Switching function (idle state)
• Select the switching function, see Tab. 14.3.
• Press ENTER.
Options\Channel A\Outputs\...\Test signal B1
Options\Channel A\Outputs\...\Enter test value B1
Options\Channel A\Outputs\...\Test mea. range B1
Options\Outputs\...\Enter test value B1
Source item
Switching function
(Idle state)
Output info
Test signal
Test mea. range
see annex A, p. 156
Options\Channel A\Outputs\...\Idle state