Flexim FLUXUS F60 Series Скачать руководство пользователя страница 79

Страница: 79 / 244

8 Start-up

FLUXUS F60*

8.7 Time and date

UMFLUXUS_F60xV5-0EN, 2017-10-16

8.7

Time and date

The transmitter has a battery-powered clock. Measured values are automatically stored
with date and time.

• Select the menu item

Set Clock

• Press ENTER.
The current time is displayed.
• Select

to confirm the time or

new

to adjust it.

• Press ENTER.
• Select the character to be edited with key

and

. Edit the selected character

with key

and

• Press ENTER.
The new time is displayed.
• Select

to confirm the time or

new

to adjust it again.

• Press ENTER.

After the time has been set, the date is displayed.
• Select

to confirm the date or

new

to adjust it.

• Press ENTER.
• Select the character to be edited with key

and

. Edit the selected character

with key

and

• Press ENTER.
The new date is displayed.
• Select

to confirm the date or

new

to adjust it again.

• Press ENTER.

Special Funct.\SYSTEM settings\Set Clock\TIME

Special Funct.\SYSTEM settings\Set Clock\DATE

Содержание FLUXUS F60 Series





















































































































































































































































Результаты поиска

Содержание FLUXUS F60 Series

Отзывы:

Flexim FLUXUS F60 Series, Руководство по эксплуатации, Страница: 79 / 244

Результаты поиска

Содержание FLUXUS F60 Series

Отзывы: