Flavor Burst FB 80Sa-08, Руководство пользователя

Страница: 56 / 76

55
7. Holding the fitment in place, raise the open
end of the tray and flip the tray right side up.
As the tray is set back down, allow the bag
to settle in the tray. (See Figure 154.)
Figure 154
8. Make sure the syrup bag is settled neatly
into the tray, and then install the loaded tray
into the cabinet. (See Figure 155.)
26196
Figure 155
9. Clean the outer surfaces of the Syrup Bag
Connector with detergent water, single
service towel and brush if necessary. Then
rinse and dry the connector using clean
water and single service towels. (See
Figure 156.)
Figure 156
10. Using a spray bottle of approved sanitizer
solution, spray the syrup bag fitment and
the Syrup Bag Connector. Allow these
parts to sanitize for at least 1 minute. (See
Figure 157.)
26271
Figure 157
11. Connect the Syrup Bag Connector to the
syrup bag fitment by sliding the Connector
head back to reveal the inner casing. Install
the Connector’s inner casing over the bag
fitment and release the Connector head to
secure the connection. (See Figure 158.)
26275
Figure 158
12. Select and touch the number of the new
syrup flavor to prime that pump.
13. Place a container under the Blending Head
to catch sanitizer solution and/or fresh
product to be dispensed and press WATER
/ SYRUP FLUSH to prime the syrup line.
(See Figure 159.)
26251
Figure 159