Flavor Burst FB 80Sa-08, Руководство пользователя

Страница: 50 / 76

49
Sanitizing the Blending System
If the Blending Assembly is already assembled,
disassemble it according to instructions in the
DAILY CLOSING PROCEDURES.
1. Prepare approved sanitizer solution
according to manufacturer’s instructions.
2. Place only the Blending Head portion of the
Assembly in an approved sanitizer solution.
Keep the Drive Motor upright and just above
the water line and sanitize for at least 1
minute. (See Figure 123.)
SANITIZER
WATER
LINE
DRIVE
MOTOR
26078
Figure 123
3. Place the Blending Assembly on a sanitary
tray to dry. (See Figure 124.)
26188
Figure 124
4. Remove the cap and spray the cap and
Syrup Line Manifold opening with approved
sanitizer solution. Allow them to sanitize for
at least 1 minute. (See Figure 125.)
Figure 125
5. Place the 9-Tube Assembly and Manifold
cap on a sanitary tray to dry. (See
Figure 126.)
26189
Figure 126
Installing the Blending System and
Mounting Bracket
The Mounting Bracket stabilizes the Blending
Assembly on the freezer. When properly
installed on the freezer, the Bracket should hold
the Blending Assembly level horizontally, with
the Blending Head lined up directly under the
Blending Adapter. The Mounting Bracket is
adjustable to fit many common freezer models.
Additional Mounting Bracket styles are available
for use with other models and freezer
manufacturers. Contact your local distributor
for more information.
The Blending Assembly with the Mounting
Bracket can be mounted to either side of the
freezer as shown below. (See Figure 127.)
26047
Figure 127