Flavor Burst FB 80Sa-08, Руководство пользователя

Страница: 47 / 76

46
4. Clean, rinse and dry the area of the freezer
to which the Switch or Bracket will be
attached using detergent, water, and single
service towels. (See Figure 108.)
Figure 108
5. Remove the other side of the protective
backing from the adhesive strip and attach
the Switch or Bracket Assembly to the
appropriate position on the freezer. (See
Figure 109.)
Figure 109
Installing the Keypad and Keypad Mounting
Bracket
The Keypad is the control unit for the Flavor
Burst
®
system. Normal operating functions are
performed using the Keypad and the freezer
draw handle. The Keypad is attached to the
freezer with the Keypad Mounting Bracket.
1. Slide the Keypad onto the main Bracket
plate and assemble the two Bracket parts in
the style that will best suit your freezer and
daily operations. One example is given in
the figure below. (See Figure 110.)
26120
Figure 110
2. Determine the approximate area and side of
the freezer to attach the Bracket that will
best suit your needs. Typically this is the
same side as the 9-Tube Assembly so that
the cable can be contained inside the
9-Tube Assembly Casing.
NOTE: IF YOUR FREEZER HAS AN
INTERNAL SWITCH INSTALLED, MOUNT
THE KEYPAD ON THE SAME SIDE AS THE
SWITCH JACK.
3. Thoroughly clean and dry the face of the
freezer where the Bracket base will be
attached. (See Figure 111.)
Figure 111