FläktGroup AP BIO 1000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 32

Disassembly and Disposal
AP BIO
400/500/1000/2400
28
FG-DC_10523-GB_AP Bio_IOM-R0-12/2020 • Subject to modifications
10 Disassembly and Disposal
10.1 Dismantling
To dismantle the units, proceed as follows:
9 The unit is ready for transport.
•
Observe all shipping instructions (refer to chapter 5 "Shipping and storage").
10.2 Disposal
An authorized appointed contractor specializing in waste processing must dispose
of the unit or its individual components. This appointed contractor must ensure that:
– the components are separated according to material types.
– the used operating materials are sorted and separated according to their respective
properties.
ATTENTION
Environmental damage!
Have qualified licensed staff only dismantle and dispose of the unit!
Electrocution through hazardous voltage will lead to death or serious injury.
When carrying out decommissioning and dismantling work on the unit you must:
•
Disconnect the unit from the power supply and ensure the power cannot be
switched back on.
•
Ensure the unit is voltage-free and isolated, ground and short circuit the unit,
cover or shield off neighboring live components.
Danger due to high loads!
Inappropriate handling of high loads can lead to death or serious injuries.
For unit weight, refer to the order-related documentation and the unit identification
plate.
•
Use proper lifting gear (crane equipment) for lifting and handling.
•
Never use a fork lift truck or pallet truck, as there is a risk of the unit toppling over.
•
Secure the unit against slipping.
ATTENTION
Environmental damage!
Dispose of all components and materials in an environmentally friendly manner in
accordance with the local codes, practices and environmental regulations.