FläktGroup AP BIO 1000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 32

AP BIO
Shipping and storage
400/500/1000/2400
FG-DC_10523-GB_AP Bio_IOM-R0-12/2020 • Subject to modifications
17
TRANSPORT WITH PACKAGING
Only appropriately equipped personnel must perform the transportation in compliance
with the applicable safety regulations. Lifting and rigging the unit must only be per-
formed using lifting devices appropriately designed to support the entire weight of the
unit. Do not stack the units!
Fig. 5-1 Transporting with packaging
1: Crane
2: Identification plate
3: Lift truck
•
Lifting with the lift truck (3)
Position the fork at the unit bottom and set it to the widest possible position.
•
Lifting with the crane (1)
To lift, insert poles into the feet of the unit that are long enough for the lifting ropes
and anti-slip devices to be attached. For the dimensioning of the pipes, please refer
to the figure in the corresponding section.
To avoid damage, make sure that the hoist ropes cannot rub against the unit.
•
For your own safety wear gloves and safety footwear when lifting or shipping the
unit.
5.3 Storage
Allowable storage conditions / allowable air condition for un-installed units
The storage of air purifiers and filter inserts with the virucidal agent AirFend ™ is
allowed in warehouses of type IE 12 according to EN IEC 60721-3-1 ed. 2. Units must
be stored in a weatherproof, dry and dust-free location.
Air temperature: - 15 °C to + 46 °C
Air humidity: up to 85% (relative humidity with no condensation)
Notice!
Use only supplied documentation and enclosed detailed dimensional drawings
when transporting the unit.