FläktGroup AP BIO 1000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 32

AP BIO
Safety and User Information
400/500/1000/2400
FG-DC_10523-GB_AP Bio_IOM-R0-12/2020 • Subject to modifications
5
3 Safety and User Information
This is an original operation manual verified by the manufacturer. FläktGroup AP BIO
series units are constructed using state-of-the-art technology and according to recog-
nized safety regulations.
Use the FläktGroup units only in a technically sound condition for the intended
purpose, observing the current operation manual and taking safety aspects and
potential hazards into account. Failure to follow the instructions in this manual may
result in danger to health and safety, damage to materials and incorrect unit operation.
Have all faults repaired by an authorized specialist without delay!
3.1 Availability of the operation manual
This operation manual contains important instructions regarding safe and proper
operation of the FläktGroup unit.
This operation manual must be available at the installation site of the unit at all times.
Anyone who works with or on the unit must read and observe this operation manual.
The operation manual is intended for use by fitting and installation companies, building
services engineers, technical personnel or trained persons as well as electrical
specialists.
3.2 Scope of the operation manual
This operation manual provides information about the following:
– Assembly/disassembly
– Use and operation
– Maintenance and Troubleshooting
3.3 Symbols used
The following symbols are used to highlight particular text sections in this operation
manual:
– This symbol is used for normal lists.
•
This symbol indicates instructions to follow.
9 This symbol indicates the result of an action.
ATTENTION
Damage to the unit!
In case of alarms and faults, always make sure that the cause of the error is
identified. In particular, a manual reset of an alarm without first rectifying the cause
can damage the unit and invalidate the warranty.
Notice!
Additional details on using the units are specified here.
Recycling!
This symbol is used to highlight instructions on proper reuse of packaging material
and disused components and assembly groups (separated according to recyclable
materials).