Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 44 / 62

Coefficient (COEF)
Step 5: Terminate configuration mode as describe in Configuration
Mode.
Default (DEFA)
If you want to change the current settings back to the default settings
described in Selection of Timer Mode, do as follows:
Step 1: Press the CONFIG Button.
Step 2: Select the default setting [dEFA] shown below by turning the
Stirrer Knob.
Step 3 : Press the Stirrer Knob and confirm the change to the default
settings by using the Stirrer Knob as shown below: [When you
need to save the changes]
If you don’t want to save it, press the Stirrer Knob when display shows
“SAVE NO”. [When you don’t need to save the changes]
4-27
Section 4
Control Panel