Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 18 / 62

4-1
Section 4
Control Panel
Control Panel
G
CONFIG
button
When this device is stop conduction, Configuration
Functions can be set. When user wants to change
mode, press the Config. Button with stirrer knob to
clockwise turning. Then the mode can be switching in
the following order.
Unit
Changing the
temperature unit “Cels” -
Celsius, “Fahr” - Fahrenheit
Time Changing timer mode
Offset Changing Offset setting
Limit
Set maximum heater rate when used to
temperature control.
t-H
Highest temperature set top plate and
external temperature sensor
t-L
Lowest temperature set top plate and
external temperature sensor
List
Indicating the set value to turning stirrer
knob.
Calibration
Matching Auto tuning the device to
current situation or best condition.
Coefficient
Select to using control temperature
coefficient.
Default
Change all the settings to the default
values
Motor
Minimum
Minimum stirring speed set (range :
1~1000rpm)
Escape Config. mode to be end
H Speed display STIRRER speed, timer
Knob
– Set a value and select a function, turn knob left or right.
I Heater knob Temperature setting
J Stirrer knob
STIRRER speed setting, value setting on
Config.