Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 39 / 62

Changing the Low Temp
Limits (t-L)
Note that the default setting of the low temperature limit [t-L] 0°C. If
needed, however, you can set your own temperature limits. If, for
example, you want to set the high temperature limit at 100°C, do as
follows:
Step 1: Press the CONFIG Button.
Step 2: Select the temperature limit mode shown below by turning the
Stirrer Knob. Press the Stirrer Knob and check the current low
temperature limit:
Step 3: Change the limit to the desired value by turning the Stirrer
Knob.
Step 4: Save the desired limit by using the Stirrer Knob as shown
below. [When you need to save the changes]
If you don’t want to save it, press the Stirrer Knob when display shows
“SAVE NO”. [When you don’t need to save the changes]
4-22
Section 4
Control Panel