Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 36 / 62

Temperature Offsetting
(OFST/OFSP*)
[OFST- Top plate offsetting] [OFSP- External temperature probe]
Step 5: Terminate configuration mode as described in Configuration
Mode.
Maximum Heating Rate
Setting (LIMt)
The higher the heating rate, the faster the heat up time but the wider
the temperature overshoot and undershoot. Therefore, if you want to
reduce the temperature fluctuation, you need to limit the heating rate to
a certain degree by limiting maximum heating rate. [Same function as
Temperature Setting].
If, for example, the current heating rate is 100% but you want to set the
heating rate limit at 60%, do as follows:
Step 1: Press the CONFIG Button.
Step 2: Select Limit (LIMt) turning and pressing the Stirrer Knob.
Step 3: Change the limit to the desired value by turning the Stirrer Knob
and press the Stirrer Knob.
4-19
Section 4
Control Panel