Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 43 / 62

Coefficient (COEF)
[User-selectable temperature control modes]
Optimal Mode
Providing the optimal balance between the heat up
time to reach the target temperature and the
allowed fluctuation range of temperature overshoot
and undershoot (factory default)
Fast Mode
Providing the fastest heat up time but the widest
fluctuation range of temperature overshoot and
undershoot
Slow Mode
Providing the slowest heat up time but the
narrowest fluctuation range of temperature
overshoot and undershoot
Point Mode
Allowing linear heating up to the target temperature
using the maximum heating rate and switching on
and off the heater based on the target temperature
(Note that this mode shows the widest fluctuation
range of temperature overshoot and undershoot.)
User Mode
Allowing the auto-tuned parameters to be used for
temperature control
Step 4: Save the desired mode by using the Stirrer Knob as shown at
right. [When you need to save the changes]
If you don’t want to save it, press the Stirrer Knob when display shows
“SAVE NO”. [When you don’t need to save the changes]
4-26
Section 4
Control Panel