Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced, Руководство по эксплуатации

Страница: 37 / 62

Maximum Heating Rate
Setting (LIMt)
Step 4: Save the desired limit by using the Stirrer Knob as shown
below. [When you need to save the changes]
If you don’t want to save it, press the Stirrer Knob when display shows
“SAVE NO”. [When you don’t need to save the changes]
Step 5: Terminate the configuration mode as described in Configuration
Mode.
• When the heat up time is too slow, check whether the maximum
heating rate is set too low.
• Maximum heating rate set point can only be applied in top plate’s
control mode, not the external temperature probe mode.
Changing the High
Temp Limits (t-H)
Note that the default setting of the high temperature limit [t-h] 350°C. If
needed, however, you can set your own temperature limits. If, for
example, you want to set the high temperature limit at 200°C, do as
follows:
Step 1: Press the CONFIG Button.
Step 2: select the temperature limit mode shown below by turning the
Stirrer Knob. Press the Stirrer Knob and check the current
high temperature limit:
4-20
Section 4
Control Panel