Fischer Panda Panda AGT 6000, Руководство пользователя

Страница: 125 / 192

Maintenance Instructions
9.12.14 Kapitel/Chapter 7: Maintenance Instructions - Seite/Page 125
7.10 Fuel circuit maintenance
7.10.1 Checking the water separator in the fuel supply
Fig. 7.10-1: Fuel filter with water separator The pre-filter with water separator has a cock at its lower
surface, with this cock the downward sunk water can be
discharged.
7.11 Ventilating the fuel system
Normally, the fuel system is designed to ventilate air itself i.e. as soon as the electric starter motor starts operation
the fuel pump starts working and the fuel system will be de-aerated after some time automatically. It is nevertheless
essential to ventilate the system as follows prior to the first operation (as all hoses are empty):
Attention: Generators with iControl system do not need a Failure
bypass switch. At these generators the fuel pump can be
activated by an option of the control panel. See Control
panel manual.
1. Main power switch „OFF“
Fig. 7.11-1: Failure bypass switch
2. Press failure bypass switch and keep firmly pressed.
The electrical fuel pump must be audible. Switching on
and off the solenoid valve at the generator will be audible
by pressing the failure bypass switch (if capsule
removed).
Note!
Generators with iControl system has no failure bypass
switch. The Fuel pump can be activated at the iControl panel.
Please see iControl manual for details.