Fischer Panda Panda AGT 6000, Руководство пользователя

Страница: 112 / 192

Installation Instructions
Seite/Page 112 - Kaptitel/Chapter 6: Installation Instructions 9.12.14
6.12.6.1 Electrical fuses - Dipole switch at battery bank
It is absolutely essential that the electrical system installation is inspected by a qualified electrical technician. The
generator should have its own DC fuse and battery switch in the connection line rectifier unit to battery bank. The
fuses should be sized such that the rated current of the generator is not exceeded by more than 25%.
The fuses must be of the slow type.
6.12.7 Generators with external rectifier unit
Fig. 6.12.7-1: External rectifier unit
ATTENTION! The external rectifier unit must be installed in a fireproof
protected area!
6.12.7.1 Installation of the rectifier unit
Cooling water connection.
If the generator has no special connection points, the external rectifier unit can be installed in line with the external
ventilation valve. (between ventilation valve and generator)
see Fig. 6.4, “Cooling system installation - raw water,” on Page 73
6
1
7
5
3
2
4
1. Electrical fuses and connection thermo-switch heat
sink
2. Main terminal block
3. Thermo-switch heat sink
4. Thermo-switch (+) rail
5. Thermo-switch (-) rail
6. Connection storage batteries (+)
7. Connection storage batteries (-)