Fischer Panda 5000i PVK-U, Руководство пользователя

Страница: 138 / 174

General operation
Page 138 - Chapter 10: General operation 30.10.12
Note:
In the sub-menus, set the desired values with the cursor
buttons, and then confirm your settings with the Start/Stop
button.
After setting all parameters, you can exit the set-up menu with the menu item "Save & Exit". In doing so, all settings
entered in the sub-menus backlight 1, backlight 2, dimtime, and Network ID are saved to the EEPROM. Then, the
goodbye screen appears for 3 seconds, and the controller is switched off.
At the next start of the controller, the changes will take effect.
10.2.3 The configuration menu ("config")
STOP!
Settings in this area must only be entered by Fischer Panda
associates and Fischer Panda service points.
The "config" sub-menu is a password protected area in which the generator type can be selected, and generator
parameters in the EEPROM can be modified.
10.2.4 The network ID
STOP! Network ID must not be modified
Settings in this area must only be entered by Fischer Panda
associates and Fischer Panda service points.
Changing the network ID can result in malfunction.