Fischer Panda 10000 NE, Руководство пользователя, Страница: 111 / 208

Maintenance Instructions
11.3.11 Panda PMS 8.000 NE - 42 NE Manual.R05 - Kapitel/Chapter 6: Maintenance Instructions Seite/Page 111
Fig. 6.10.2-8: Knocking out the ball bearing
Knocking out the ball bearing
Put the bearing housing horizontally on e.g. 2 wood ledges, the ball bearing
pointing downwards. Alternatively, the bearing housing can rest on the lifting
screws.
Place an appropriate bolt (e.g. extension of a ratch) on the inner bearing
ring.
Knock the bearing out of the seat with several careful hammer scales.
Thereby move the bolt after each scale to keep the bearing from canting.
Fig. 6.10.2-9: Dismounted ball bearing
Dismounted ball bearing
Fig. 6.10.2-10: Dismount the shaft sealing ring
Dismount the shaft sealing ring:
We recommend our mandrel.
Put it in the sealing ring with the small end downwards.
Knock the sealing ring out of the seat with careful hammer sca-
les.