Firenzo Topaz RURAL, Инструкция по установке и эксплуатации

Страница: 8 / 34

Topaz RU Installation - April 2019 8
5. INSERT FLUE SYSTEM
For Installation in a Masonry Fireplace
WARNING: The Fire and Flue system
must be installed in accordance with
AS/NZS 2918:2001 and the
appropriate requirements of the relevant
building code or codes. If the Flue
system has been AS/NZS 2918:2001
Appendix F tested by the Flue
manufacturer then their specifications
supersede the standard requirements
and must be adhered to
.
1.
Position Fire in fireplace. Extend plumb
line from top of chimney, ensuring Fire spigot
is in line with top of the chimney. If not, flue
offsets will be required.
2. Assemble flue ensuring all seams are in
line and assembly is straight and tight with
crimped ends pointing downwards.
Secure flue with at least 3 stainless steel or
monel rivets and seal.
3. Fasten chimney plate supplied onto the
chimney top. The chimney plate must be
weather sealed with silicone or mortar.
4. Install chimney liner on top of the
chimney plate.
5. Ensure flue is extended over the chimney
liner by 180mm. Secure top spacer bracket to
the flue and ensure slots fit snugly inside the
chimney liner.
6. Slide flashing cone over top of flue, until
it rests firmly over top spacer.
Ensure ventilation gap is not closed off.
Secure with pop rivets or self
- tapping screws
.
7. Fit anti - down draught cowl. Do Not secure
as it must be removed for cleaning.
WARNING: The Fire and Flue System shall be installed in accordance with AS/NZS
2918:2001 Appendix F and the appropriate requirements of the relevant building code
or codes. Firenzo/SFP Flue Kits or Davin Flue Kits must be used.
CAUTION: Mixing of Fire or Flue System components from different sources or
modifying the dimensional specifications of components using more than 1 metre of
extra flue may result in hazardous conditions. Where such action is considered the
manufacturer should be consulted in the first instance.