Fire-Lite Alarms ES-200X Скачать руководство пользователя страница 64

Страница: 64 / 168

ES-200X Series Manual —

P/N LS10131-000FL-E:C 7/25/2018

Programming

Master Programming Level

Pressing

while viewing the Noun/Adjective Screen will cause the following screen(s) to be displayed.

Note that the keyboard

down

arrow key must be pressed to see all the Adjective screens. Press the number

corresponding to the adjective that is to be used as a descriptor for the location of the monitor module cur-
rently being programmed.

Pressing

while viewing the Noun/Adjective Screen will cause the following screen(s) to be displayed.

Note that the keyboard

down

arrow key must be pressed to see all the Noun screens. Press the number cor-

responding to the noun that is to be used as a descriptor for the location of the monitor module currently
being programmed.

Pressing 3 or 4 while viewing the Noun/Adjective Screen will display screens similar to the previous Adjective and Noun Screens. The
new screens will list Custom Adjectives and Nouns which have been programmed into the control panel using the FS-Tools utility.

Description

The Description selection allows the programmer to enter additional information about the monitor module
currently being programmed. This information will be displayed as part of the device label on the LCD dis-
play. Pressing

while viewing Edit Monitor Screen #5 will cause the following screen to be displayed:

A flashing cursor will appear at the first asterisk to the left. The programmer can enter additional descriptive information about the
device being programmed. This information will appear on the LCD display along with the standard device label information.

A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric characters from the keypad, repeatedly press the
appropriate key until the desired character is displayed in the first position. For example, to enter the letter

, press the

2 (ABC)

key three

times to toggle through the characters

and

. Press the right arrow key to move the cursor one position to the right and repeat the

process to enter the next character. To enter a space, press the

* (QZ)

key four times until a blank appears in the desired position. When

all characters have been entered, press the Enter key to store the information. The display will return to the Edit Monitor Screen #4, dis-
playing the new information at the bottom of the screen.

Recall/Increment Function

In addition, the user may use the Recall/Increment function at any time when the cursor is on the first letter of the Adjective or Noun
field as follows:

•

If the zero key is pressed, a

is placed in the first letter position

•

If the zero key is then pressed a second time with no intervening key actions, the entire Adjective field is replaced with the field
entered

for the previous device programmed

, and the cursor moves to the last character of the field (Recall function). The Recalled

Adjective or Noun field may now be changed letter-by-letter

•

If the zero key is pressed again with no other intervening key actions and the last character in the field is a number

0-9

, the number